Dillon Primer Rod Holder – Product Instructions

Warning: Do not over tighten this item onto the primer tube, the plastic will crack under stress. Warranty claims due to incorrect installation will be denied.

  1. Remove primer warning buzzer (if applicable)
  2. Remove existing knurled cap nut
  3. Carefully thread the Dillon Primer Rod Holder onto the primer magazine tube. Do not over tighten!
  4. Replace knurled cap nut and primer warning buzzer

There should be adequate clearance for the nut to be slightly adjustable without the knurled cap nut touching the Dillon Primer Rod Holder.

%d bloggers like this: